User's Manual

M033103V10

dialog box, and remove the tick in the

Use Windows to configure my wireless network

settings

checkbox.

Figure 2.4-11: The

Wireless Network Connection Properties

Dialog Box

n) Click

. Now, you have successfully removed the

Windows Zero Configuration

To monitor and configure the network via

PRISM Configuration Utility

, double-click its

tray icon, and you should find four tabs contained in the popped up

PRISM Wireless

Settings

dialog box at this time. For more details about the utility, please refer to

PRISM

Configuration Utility Basics below.

Note: If you wish to use Windows XP’s built-in configuration tools – Windows XP Zero Configuration,

please refer to the next chapter: Configuration for Windows XP to configure the WLAN USB Module.

2.5 Verifying a Successful Installation

To confirm that your 802.11b Wireless LAN USB Module is properly installed, please go along with the

procedures below.

1. Right-click the

My Computer

desktop icon, and choose

Properties

from the opened menu.

2. In the

System Properties

dialog box, choose

Device Manager

if you are under Windows 98

or Me. If you are operating Windows 2000 or XP, click the

Hardware

tab, and then choose

the Device Manager button.

3. In the opened window, expanding

Network adapters

to find the USB Module -

WLAN

IEEE802.11b PRISM USB Adapter

. Right-click over the item and choose

Properties