Wireless LAN USB Adapter WN-200 User’s Manual Version 1.
Copyright © 2002 by Airvast. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from the copyright owner. All the other trademarks and registered trademarks are the property of their respective owners. Statement of Conditions We may make improvements or changes in the product described in this documentation at any time.
1. INTRODUCTION This document describes how to install the WN-200, Wireless LAN USB Adapter. Wireless LAN is local area networking without wires, which uses radio frequencies to transmit and receive data between PC’s or other network devices. Wireless LAN is able to configure independent networks and infrastructure networks. The former is suitable for small or temporary peer-to-peer configurations, and the later is offering fully distributed data connectivity via micro cells and roaming. 2. INSTALLATION 2.
Installation Procedure for Windows 2000 Users: 1. Turn on your computer. 2. Make sure that WN-200 has not been connected to the computer yet. 3. Place the supplied CD-ROM to the CD-ROM drive. The Setup Utility should run automatically. If it does not, please run d:\setup.exe manually, where d: is the letter of the CD-ROM drive. 4. A screen displays the important notice. Please read it and click the Ok button. 5. Click the Next button after seeing the welcome message. 6.
