User guide

9
Configuring AIRAVE™ Access Point’s Router
Your AIRAVE contains a built-in router. Usually, you can plug your AIRAVE into your broadband
connection device, such as a cable modem, DSL modem or FiOS (a high-speed, fiber optic broadband
Internet service), without performing any additional steps. However, you may need to configure the built-in
router to work with your ISP modem or connection device.
The following table lists typical ISP setups and actions to take so that the built-in router works with your
existing ISP setup.
.
Broadband
connection device
LED display pattern Symptom Action to take
Cable modem
Broadband and Mobile solid
green
Not applicable
(working properly)
Not applicable
DSL modem
Broadband LED blinking
green
Cannot access Internet Go to “Adding Your ISP
User Name and
Password” (page 10).
DSL modem with
router
Broadband LED blinking
amber
Mobile LED blinking green
Cannot access Internet
Cannot make a mobile or
VoIP phone call through
the AIRAVE
See “FAQ” (page 25).
If the problem persists,
contact Customer
Support as described in
“Getting Help” (page 26).
Cable modem
with router
FiOS