Specifications

Page 76
hELi MODEL TyPE
Choosing the Flight Mode - Common or Separate
1) From the Display screen, press the ENTER key to display the Programming
Menus.
2) Press the Navigation Pad
56
to highlight GYRO, then press the
ENTER key to display the GYRO menu. The cursor will default to
1>100%.
3) Press the Navigation Pad
5
to move the cursor to F-MODE>COMMON.
4) Press the INC+/M1 or DEC-/M2 keys to choose either SEPARATE or
COMMON.
5) If you choose SEPARATE, press the F-MODE key to choose the
F-MODE number you would like to program the Remote Gyro Gain
Control function for. Choose from FN, F1 or F2.
Changing the Gyro Percentage Values
The Gyro percentage values determine both the amount of gain and the gyro operating mode - either Heading Hold mode or Rate
mode. In general, positive values will result in your gyro operating in Heading Hold mode and negative values will result in your
gyro operating in Rate mode. The amount of gain is determined by the percentage value.
IMPORTANT Whether you use positive or negative Gyro percentage values to program your gyro in either Heading Hold
mode or Rate mode will be determined by the NOR/REV settings of the gyro channel in the REVERSE menu. For example,
if the gyro channel is set to NOR (Normal) in the REVERSE menu, positive Gyro percentage values may result in your
gyro operating in Heading Hold mode, but if the gyro channel is set to REV (Reverse) in the REVERSE menu, positive Gyro
percentage values may result in your gyro operating in Rate mode. You will need to test your gyro to ensure that it's operating
in the desired mode based on the percentage values, then adjust the percentage values accordingly to achieve the desired
amount of gain.
You can program two different Remote Gyro Gain Control functions and control them using the Gyro switch. When
programming Gyro percentage values, the 1> percentage value is controlled by the Gyro 1 switch position and the 2>
percentage value is controlled by the Gyro 2 switch position.
1) Press the Navigation Pad
6
to highlight 1>100%.
2) Press the INC+/M1 or DEC-/M2 keys to choose the desired Gyro 1
percentage value.
19.gyRO (REMOTE gyRO gain cOnTROL), cOnTinUED....
3) Press the Navigation Pad
6
to highlight 2>100%.
4) Press the INC+/M1 or DEC-/M2 keys to choose the desired Gyro 2
percentage value.