User's Manual

To charge battery, Camera Docking Station (A-390-DOCK) or
Airtraq Docking Station (A-590) can be used:
4.1. CAMERA DOCKING STATION (A-390-DOCK)
To charge battery using Camera Docking Station (A-390-
DOCK):
1. Connect the stand-alone battery charger to mains
electrical supply.
2. Insert the micro USB connector to Docking Station and
place A-390 onto it.
3. Alternatively, insert charger’s micro USB connector
directly into the A-390.
Upon starting to charge battery the A-390 will automatically
turn Off.
When battery is being charged the user can check charge
status by touching the screen, which will show available
minutes of operating time and a battery icon.
4.2. AIRTRAQ DOCKING STATION (A-590)
The Airtraq Docking Station (A-590) recharges the battery
and displays the remaining service life of the Airtraq Avant
Optics and Airtraq Wi-Fi Cameras A-360 and A-390.
The A-590 Docking Station is supplied ready to use. Its
package includes a Battery Charger needed to connect it to
mains supply. USE DOCKING STATION ONLY WITH
BATTERY CHARGER PROVIDED.
In order to keep the Airtraq Avant Optics clean it shall be
inserted into the Docking Station covered by the Optics
Storage Case.
A full battery recharge cycle of the Airtraq Avant Optics takes
around 120 minutes. When the battery is fully charged it can
be used for around 120 minutes.
The manufacturer recommends placing the Optics and/or
Camera into the Docking Station after each intubation.
No maintenance of the Docking Station is required.