User's Manual

6 7
To charge battery:
1. Connect the stand-alone battery charger to mains electrical
supply.
2. Insert the micro-USB connector directly into the A-360 or to
Docking Station and place A-360 onto it.
Upon connecting to the charger the A-360 will automatically turn
Off, Battery charge indicators will indicate status, as follows:
• 3 Steady Green Lights: Battery Full (operating time: 100 min.)
• 2 Steady Green Lights: Battery > 60 % (operating time: 60 to
100 min.)
• 1 Steady Green Light: Battery > 30 % (operating time: 30 to 60
min.)
• 1 Blinking Green Light: Battery < 30 % (operating time: 10 to 30
min.)
• 1 Steady Red Light: Battery too low (A-360 will not turn on)
During the charging process, if the screen is touched, an icon on the
screen will indicate charge status, as follows:
• 4 Steady Green bars: Battery Full (operating time: 100 min.)
• 3 Steady Green bars: Battery > 60 % (operating time: 60 to 100
min.)
• 2 Steady Green bars: Battery > 30 % (operating time: 30 to 60
min.)
• 1 Steady Green bar: Battery < 30 % (operating time: 10 to 30
min.)
• 1 Steady Red Light: Battery too low (A-360 will not turn on)
When the A-360 is turned on, an icon and a percentage of charge
will appear on the header of the screen showing battery charge
status.
When in use, if the battery falls below 10% of its capacity the Battery
Charge Indicator on the header of the screen and the left charge
indicator will become red. The A-360 will continue to operate for
approximately 15 more minutes. The manufacturer recommends
recharging the battery of the A-360 as soon as the battery charge
falls below 25%.
Service life for the rechargeable battery depends upon the number of
charge-discharge cycles performed. The A-360´s battery is a service
replaceable part, if its capacity falls below the acceptable levels
please contact your supplier. The A-360 should never be opened by
unauthorized personnel. Internal battery can only be replaced by the
manufacturer.
6. MOUNTING THE A-360 ONTO THE AIRTRAQ
To mount the A-360,
• Remove eyecup from Airtraq.
• Place A-360 lock system button in “Open” position.
• Slide A-360 onto Airtraq.