User's Guide

ATS58-2020 5.8GHz Motion sensor
Version 1.0
Page 7
Power on Sequence
The module has a power-on self-test function, that is, after the module is powered on, the out
pin outputs the high level first, the low level is output after the delay of 1s, and the low level is
delayed for 1s before entering the normal induction mode. The following is the sequence diagram
of the control signal after the module is powered on：
Figure5 Power on Sequence
OUT
vcc
1 S
1 S
With inductive out = 1, without
inductive out = 0