User's Guide

ATS58-1818 5.8GHz Motion sensor
Version 1.1
8
11. Requirement of FCC KDB 996369 D03 for module certification:
11.1 List of applicable FCC rules:
The module complies with FCC Part 15.249
11.2 Summarize the specific operational use conditions:
The module has been certified for Fix, Mobile, Portable applications. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
11.3 Limited module procedures:
The module has not its own RF shielding, which belong to Limited module
Standard requires:
Clear and specific instructions describing the conditions, limitations and procedures for third-
parties to use and/or integrate the module into a host device (see Comprehensive integration
instructions below).
Resolve: Supply example as follows:
Installation Notes:
1) ATS58-1818 module Power supply range is DC 4.5~5.5V, when you use ATS58-1818 module
design product, the power supply cannot exceed this range.
2) When connect ATS58-1818 module to the host device, the host device must be power off.
3) Make sure the module pins correctly installed.
4) Make sure that the module does not allow users to replace or demolition
11.4 Trace antenna designs:
Not applicable.
11.5 RF exposure considerations: