User's Guide

ATS58-1818 5.8GHz Motion sensor
Version 1.1
4
3.Input and Output Interface
ATS58-1818 can be embedded in end product with three contact PINs, the PIN space is
2.54mm, below is the detail description about the interface:
Pin Name Function Note
VCC Power supply
LDO is not attached by default, VCC is 5V, the default power
consumption of the module is 35mA, and the recommended power
driving capacity is> 50mA
GND Ground PIN
OUT Output control
Output is 5V TTL by default, could be PWM if needed
4.Specifications
Parameters Min. Typical Max. Unit Note
Frequency 5750 5870 MHz
TX Power 0.5 1 mW
Input VCC 4.5 5 5.5 V
Without external LDO
Output High Level 5 V
Output Low Level 0 V
Current 35 50 mA
Mounting Height 3 10 M
Can be tuned if needed
Detection Radius 5 10 M
Related to mounting height
Hold time 30 S
Can be tuned if needed
Daylight sensor 10 Lux
Can be tuned if needed
Operating TEMP -30 105
°C