User's Guide

AT58L4M32-2020 Motion sensor
Version 1.2
Page11
9. Additional testing, Part 15 Subpart B disclaimer:
The modular transmitter is only FCC authorized for the specific rule parts (FCC Part 15.249)
list on the grant, and that the host product manufacturer is responsible for compliance to any
other FCC rules that apply to the host not covered by the modular transmitter grant of
certification. The final host product still requires Part 15 Subpart B compliance testing with
the modular transmitter installed when contains digital circuity.
When testing host product, the host manufacture should follow FCC KDB Publication
996369 D04 Module Integration Guide for testing the host products.The host product shall
work normally, all the transmitters installed must be operating, investigate the fundamental
and unwanted/spurious emissions with the modular transmitter(s) operating in a normal
mode. When testing for emissions from the unintentional radiator, the transmitter shall be
placed in the receive mode or idle mode if possible, if receive mode only is not possible, test
laboratories may need to add attenuation or filters depending on the signal strength of any
active beacons (if applicable) from the enabled radio(s).