User manual

1.1.MainFeatures

1.2. MinimumSystem Requirements

1.3. PackageContents

• IEEE 802.11b/g compliant, 54Mbps Wireless Access Point, Repeater, Bridge

• Fully compatible with widely used Centrino laptops and 802.11b/g wireless devices

• AirTies Mesh Technology support to extend wireless coverage area across very wide

areas or concrete buildings where signal strength problems are common

• Used as a "Wireless Bridge", ability to include wired devices with an Ethernet interface

in the wireless network

• Wireless operating ranges of up to 400 meters outdoors and 100 meters indoors

• Advanced wireless security with support for WPA2, WPA,WEP, and 802.1x standards

• High performance through the use of the latest chip technologies

• With "Auto MDI/MDIX", it automatically detects straight and cross Ethernet cables

• Easy to use Web-based user interface

• Automatic local IP address assignment by the DHCP server

• Firmware updates through the web interface

• 24x7 technical support by the highly trained AirTies Technical Support backed up by

the AirTies R&D team

• In order to configure the AirTies AP-400, you will need a PC that runs any version of

Windows, UNIX, Linux, or MAC operating systems and has an Ethernet card or a

wireless network adapter

• The AP-400 does not need to be connected to a PC during normal operation.

• AP-400 54Mbps 802.11g Wireless Access Point / Repeater / Bridge

• Ethernet Cable

• Power Adapter

• User Manual

AirTies AP-400 User Manual