User manual

1
AirTies AP-400 User Manual
Manual Overview
This manual guides you through the steps necessary for setting up and configuring the
AirTies AP-400 54Mbps 802.11g Wireless Access Point/Repeater/Bridge. Please read this
manual carefully before beginning the installation process.
The Warranty does not cover failure or damage as a result of not following the instructions
in the manual. AirTies will not be held responsible in such circumstances.
The User Manual is an important resource you can refer to for safe and proper use of
your device. Please retain it for future reference.
Safety and Maintenance
• In order to prevent damage to your device, be sure to keep it in its original box during
• The device must be used solely with its original power adapter. Please note that the
adapter is 220V only. Do not use with 110V AC.
• Do not insert a PSTN (phone) plug into the LAN port.
• If you encounter any problems, do not open or disassemble the device. Instead, call
AirTies Technical Support.
• In order to prevent electric shock, do not operate the device in wet or damp areas.
• In the event of a gas leak, do not use the device. Do not turn the device on or off.
Do not plug or unplug the power cord.
• Avoid using the device in dusty environments. If dust buildup should occur, use a dry
cloth to remove the dust.
• To clean the exterior of the device use a dry cloth. Do not attempt to clean the interior.
There are no user serviceable components inside.
• For information regarding the installation and configuration of the device consult the
remainder of this manual.