User manual

AirTies AP-400 User Manual

In this window, you will see a list of all the available wireless access points that the AP-

400 Bridge can connect to. Check the box next to the access point you would like to

connect to and click "Save".

To set the bridge mode, go to "Operation Mode" under the "WIRELESS" menu of the web

interface. Select Bridge in the "Operation Mode" field and click "save"

Note: The AP-400 does not do wireless broadcast in Bridge mode. To configure and

operate the AP-400 in Bridge mode, you need to be directly connected to the AP-400.

When you select Bridge as the "Operation Mode", the "Access Point List" page will come

up. At the same time, "Access Point List" will appear under the "Wireless Settings" menu

of the web interface.