User manual

4
AirTies AP-301 User Manual
3. Preparing For Installation
3.1. Assigning a local IP address to a computer that is
running WindowsXP
The installation settings of the AP-301 must be done from a PC that is
directly, not wirelessly, connected to it. However, the AirTies AP-301
cannot assign an IP address to the PC connected to it for doing the
installation settings since the DHCP feature is not enabled in the default
factory settings. Therefore, an IP address will need to be assigned
manually to the PC.
Double-click on the "Local Area Connection" icon on
the bottom right corner of the WindowsXP desktop. This
will bring up the "Local Area Connection Status" window.
Click "Properties" to go to the "Local Area
Connection Properties" window.
Select "Internet Protocol (TCP/IP)" and click
"Properties".