User manual

Manual Overview
This manual guides you through the steps necessary for setting up and
configuring the AirTies AP-301 54Mbps 802.11g Wireless Access
Point/Repeater/Bridge. Please read this manual carefully before beginning
the installation process.
The Warranty does not cover failure or damage as a result of not following
the instructions in the manual. AirTies will not be held responsible in such
circumstances.
The User Manual is an important resource you can refer to for safe and
proper use of your device. Please retain it for future reference.
Safety and Maintenance
 In order to prevent damage to your device, be sure to keep
it in its original box during transportation.
 The device must be used solely with its original power adapter.
Please note that the adapter is 220V only. Do not use with
110V AC.
 Do not insert a PSTN (phone) plug into the LAN port.
 If you encounter any problems, do not open or disassemble
the device. Instead, call AirTies Technical Support at +90 212
444 0239.
 In order to prevent electric shock, do not operate the device
in wet or damp areas. Do not use the phones connected to
the device during lightning storms.
In the event of a gas leak, do not use the device. Do not turn
the device on or off. Do not plug or unplug the power cord.
 Avoid using the device in dusty environments. If dust buildup
should occur, use a dry cloth to remove the dust.
 To clean the exterior of the device use a dry cloth. Do not
attempt to clean the interior. There are no user serviceable
components inside.
 For information regarding the installation and configuration
of the device consult the remainder of this manual.