User manual

 Check the Enable WEP Encryption box.

 Depending on which encryption level you choose, enter a network

key in the corresponding field.

 64-bit hexadecimal encryption : Enter a key of up to 10 hexadecimal

 haracters (0-9 and A, B, C, D, E, F) e.g. "4321abcdef"

 64-bit ASCII encryption : Enter a key of up to 5 ASCII characters(all

digits and letters) e.g. "sifre"

 128-bit hexadecimal encryption : Enter a key of up to 26 hexadecimal

characters (0-9 and A, B, C, D, E, F) e.g.

"12a34b56c78d90e123456f7890"

 128-bit ASCII encryption : Enter a key of up to 13 ASCII characters

(all digits and letters) e.g. "kablosuzsifre"

You must activate WEP and set the same network key in all the wireless

devices that will communicate with the AP-301.

4.5. Access Control

To enable Access Control go to "Access Control" under the "WIRELESS"

menu of the AP-301 web interface. In the window that appears, you

can enter the MAC addresses of the devices that are permitted to

access the AP-301. No other device but those permitted can connect

to the AP-301.

AirTies AP-301 User Manual