User manual

4.3.3. Configuring the AP-301 as a Bridge
You can include a wired device (e.g. printer) to your wireless network
by connecting the device to the LAN port of an AP-301 operating in
Bridge mode. The diagram below is an example of the AP-301's use as
a bridge (connected to a printer).
To set the bridge mode, go to "Operating Mode" under the "WIRELESS"
menu of the web interface. Select Bridge in the "Operating Mode" field
and click "Save".
Note: The AP-301 does not do wireless broadcast in bridge mode. To
configure and operate the AP-301 in bridge mode, you need to be
directly connected to the Ethernet port.
When you select Bridge as the "Operating Mode", the "Access Point List"
page will come up. At the same time, "Access Point List" will appear
under the "Wireless Settings" menu of the web interface.
14
AirTies AP-301 User Manual