User manual

 On the computer(s) that will be connected to the AP-301 wirelessly,

start the utility program for the Wireless Access Card (e.g. "Intel Proset"

or "Wireless Network Connection" for Windows). Look for wireless

networks in range in the "View Wireless Networks" window. Connect

to the wireless network whose name (SSID) is "AIRTIES_AP-301", the

default SSID of the wireless network set up by the AP-301. If you have

assigned a different SSID to your wireless network during configuration,

connect to that one.

On your Windows computer, double-click the "Wireless Network" icon

on the bottom right corner. In the "Wireless Network Connection Status"

window that appears, click the "View Wireless Networks" button. The

result will be similar to the one shown below. This example assumes your

wireless network has the default SSID "AIRTIES_AP-301".

4.3.2. Configuring the AP-301 as a Repeater

To use the AP-301 as a repeater, go to "Operating Mode" under the

"WIRELESS" menu and select Repeater as the "Operating Mode". The

following diagram is an example of the AP-301's use as a repeater.

AirTies AP-301 User Manual

INTERNET

Phone Line / DSL

AP-301 Repeater

WUS-300

PCC-2

WUS-300

RT-211