User manual

4.2. Wireless Network

As a wireless access point, the AP-301 enables mobile devices to access

the local network.

Clicking on the "WIRELESS " menu on the left menu bar of the AP-301

web interface displays all the wireless devices connected to the AP-

301. You can block a device's access to the AP-301 by checking the

"Block" box to the left of the MAC address of the device.

AirTies AP-301 User Manual

When all your modifications are done, click "Save".

4.2.1. Wireless Settings

To configure your wireless network, go to "Wireless Settings" under the

"WIRELESS " menu of the AP-301 web interface.

 Wireless Network Name (SSID) : In this field, you can assign a name

to your wireless network and enable/disable the broadcasting of this

name by the AP-301.

 Channel : Enter the broadcast channel number (frequency) in this

field.

 Data Rate : You can adjust the wireless data rate of the AP-301.

However, it is recommended that you leave this field as Auto.

 Mode : Select the wireless mode the AP-301 will be operating in.

 Wireless Transmit Power : You can set the Transmit Power of the AP-

301. The lower the transmit power, the smaller your wireless range will

be.