User manual

4. Installation Settings

You can setup your AP-301 using the web user interface. First, open a

web browser (e.g. Internet Explorer, Mozilla Firefox, Netscape). In the

Address field enter 192.168.2.254, the default IP address of your router,

and press Enter. This will launch the web interface of your AirTies AP-301.

You will be prompted for a password to login. There is no password set

by default. Initially, leave this field blank and continue by clicking "Submit".

In the screen that appears, the "Welcome" screen, a summary of the

current network and device settings are displayed.

4.1.

IP Settings

You can change the IP address, the subnet mask and the gateway

address of the AP-301 by going to the" IP Settings" submenu under the

"LAN" menu of the web interface.

These values can be obtained from the administrator of the network

the AP-301 is connected to.

Note: If you change the IP address of the AP-301, you must use the new

address to connect to the AP-301's web interface.

AirTies AP-301 User Manual