User manual

UPNP
Universal Plug and Play is a protocol that allows devices on the
network automatically interoperate with each other. To enable UPnP
port forwarding select UPNP Settings under the UPNP menu.
Select Enable Port Forwarding. Click Save to save your settings.
IGMP
IGMP settings are required if you want to use an IPTV service on
your home network. To enable and configure IGMP go to the IGMP
menu on your Web UI. Check Enable.
Check Quick Leave if you want to enable immediate termination of
IGMP multicast group. This will improve the quality of your IGMP
broadcast. Select the upstream network interface. This is the WAN
interface that that your router will receive IGMP packets with. There
must be at least one interface defined as upstream. The Rate Limit
sets a limit on the rate of data on the network interface. This must
be a value between 0 and 32727. The TTL value is the number of
hops on the network between the network device and the client that
will receive the IGMP packets. This must be a value between 1 and
255. The downstream network interface is the LAN interface that
the client receiving IGMP data is connected to. At least one
downstream network interface must be selected and Rate Limit and
TTL set.
AirTies Media Server