User manual

device. There is also a web interface to the device that allows for
basic and advanced settings to be configured. You do not need to
be connected to the Internet to access the device's Web UI. To
connect to the device follow these steps:
1- Run a Web browser program on your computer (Internet
Explorer, Mozilla Firefox etc. ).
2- In the Web Browser's "Address" field, write the address
192.168.2.1 which is the default web interface address of device
and press "Enter"
3- The "Welcome" screen of the Web Interface will appear. On the
screen you will see a dialog box asking for the password to be
entered. By default there is no login password for your device.
Leave the password fiend empty and click OK.
Note: To set a password on the login screen, read "MANAGEMENT"
under the "Password Settings" section
Homepage
After the splash screen is the "Homepage" screen. You can see the
information about the current working status and the general
settings at your homepage screen.