User manual

A manual update can also be made by selecting "Firmware

Upgrade". A check will be made for new firmware: If no firmware

was found then the user will be informed: If new firmware is

discovered then the firmware on the device will be updated.

Software Upgrade

For the local PC there is a software upgrade option instead of

firmware upgrade. This will check for any newer versions of AirTies

Network Assistant and update if the user requests.

User Info

Registering a device provides AirTies with useful information that

we use to help the customer with if they have a problem and also

use to help us improve our products and customer experience. Each

AirTies device on the home network can be registered with AirTies.

If a user does not want to register then they can select 'Do not

Click "Cancel" to cancel any changes made and return to the

network map.

Advanced Settings

Advanced settings open the devices' Web configuration page and

allow for all other settings to be updated by the user (see settings

below).

Adding AirTies Devices

When another device is added to the network then it will be

displayed in the network map. If the new device is an AirTies device

then the user s prompted to register the device.

The user can choose not to register the device, register as a new

user or use an existing user's details that already have devices

registered to them on the network. Clicking "OK" registers the new

device. Clicking "Cancel" closes the prompt.

Advanced Settings

You can set the basic settings of the device, which are ADSL and

wireless settings, with the Easy Installation CD. The easy installation

CD allows for quick and easy installation when you first setup your