User manual

Tools
On this page, you can restart your device, reset it to factory
defaults, backup its current configuration or restore from a previous
backup. To get to the Tools screen, select TOOLS from the main
menu of the Web interface. * The Restart button restarts your router
remotely. During this operation, your connection to the router will
be lost. You can reconnect after the router comes back up. * The
Restore Factory Defaults button allows you to reset your router back
to factory defaults remotely. This will clear all the current settings
on your router. * Backup Config lets you save the current settings of
your router onto your computer. When you click the Backup Config
button, your router will create a file called config.bin to be saved on
your computer. You can restore this configuration later using the
Restore Config button.
• Restore Config lets you restore a previously saved
configuration onto your router. Click the Browse button to
locate the config.bin file that was previously saved, and then
press the Restore Config button to restore your settings from
this file onto your router.
Firmware Update
Your device is configured to automatically check for updates and
update itself if it finds an update. The process to check for updates
approximately every 30 days. By default this is enabled. You can
disable this by unchecking the Enable auto firmware update and
clicking Save. You can check for updates by clicking Check For
Updates Now. The device will contact AirTies to see if there are
updates. If there are updates then they will be downloaded and the
device will upgrade. After the firmware is successfully installed, the
system will restart automatically. Therefore, connection to the
device will be lost. You will need to reconnect if you would like to
reconfigure any settings. Your router must stay ON during the
upgrade.
If you want to manually update the firmware running on the device,
go to Firmware Upgrade under the TOOLS menu. Click Browse and
locate the most recent router firmware file on your computer in the
pop-up window that appears. (You can download the most recent
firmware file from the AirTies website www.airties.com). Then click
Upgrade.
After the firmware is successfully installed, the system will restart
automatically. Therefore, connection to the device will be lost. You
will need to reconnect if you would like to reconfigure any settings.
Your router must stay ON during the upgrade.
Time Setting