User manual

submenu from the "MANAGEMENT" for doing automatically
configuration.
• Enable TR-069: To enable TR-069 protocol, click "Enable
TR-069" check box.
• URL:Auto-configuration address (ACS)that your device will
connect. (It is given by the ACS provider to the user.)
• Username: The username that must be entered for connecting
to (ACS) the automatic configuration server. (It is given by the
ACS provider to the user.)
• Password: The password that must be entered for connecting to
(ACS) the automatic configuration server. (It is given by the
ACS provider to the user.)
• Periodic Inform Interval: This shows that the device and (ACS)
auto-configuration server's reciprocal link status and time in
seconds of controlling intervals. This time is set to 86400 sn by
default in your device.
• Connection Request Username: The username that
auto-configuration server (ACS) must use when connecting to
the device.
• Connection Request Password: The password that
auto-configuration server (ACS) must use when connecting to
the device.
After all these settings, click "Save".
UPNP
Universal Plug and Play is a protocol that allows devices on the
network automatically interoperate with each other. To enable UPnP
port forwarding select UPNP Settings under the UPNP menu.
Select Enable Port Forwarding. Click Save to save your settings.
IGMP
IGMP settings are required if you want to use an IPTV service on
your home network. To enable and configure IGMP go to the IGMP
menu on your Web UI. Check Enable.