User manual
Enter the current password and the new password twice. Select
Save to save your settings. The new password will be required next
time you access the device settings. AirTies Network Assistant will
also request this password to allow for the device to be monitored
and managed.
To allow remote management from the Internet select Remote
Management.
Please note that allowing remote management should only be
performed by experienced users. To enable remote management of
your device, first click the "Enable Remote Management" check box.
If you check the "Any IP" box, your router can be managed remotely
from any computer that has a WAN IP.
If "Any IP" is not checked, you have to add the WAN IP address of
the computer from which you would like to remotely manage your
device to the "IP Access List". To do this, enter the WAN IP address
in the "New IP Address" field and click the "Add" box.
After saving, the WAN IP address you have entered will appear in
the "IP Access List". If you select this address from the list and click
"Save", remote management will be activated for this address. If
you want to remove an IP address from the list, select the address
from the list, click on the "Delete" checkbox and then click "Save".
You can also specify which services will be available to the remote
management computers on this page.
TR-069 defines an application layer protocol for remote
management of end-user devices. With TR-069, all kind of settings
that you can do with local area network connection, can be set
automatically with auto-configuration server (ACS). Click "TR-069"