User manual

(e.g. 192.168.2.2 and 192.168.2.2). To restrict access for all
devices in an IP address range, enter the beginning and ending
IP addresses (e.g. 192.168.2.2 and 192.168.2.50). Click the
"Add >" button to add the device to the restricted list.
7. Select "Block all traffic" to block all traffic to and from the
Internet interface.
8. To block an application select an application from the list and
click "Add>" to add the application to the restricted application
list.
9. To define a new application, click the "New" button.
10. Enter a name for the application you are defining in the
"Application Name" field.
11. Enter the WAN port for the application in the WAN TCP and UDP
fields.
12. Enter the internal port number that the application will use in
the local network in the LAN TCP and UDP fields.
13. Click "Save".