User manual

characters for 64-bit encryption. c. 26 Hexadecimal characters
for 128-bit encryption. d. 13 ASCII characters for 123-bit
encryption.
5. You can enter up to 4 network keys and choose the one you
want to use. Click Save.
6. You must activate WEP and set the same network key in all the
devices that will communicate with your AirTies device.
MAC Filtering
1. Click on MAC Filtering under the WIRELESS menu of the Web
interface of your device.
2. Select the SSID that you want to configure MAC Filtering for.
3. Check the Enable MAC Filtering box.
4. To add the devices that will be permitted to access the wireless
network: * Select Just Allow MAC Addresses in MAC List. * For
each device to be allowed access, enter the wireless MAC
address of the device (e.g."00-14-38-15-60-DD") in the New
MAC Address field and then click the ADD button.
5. To add devices that will be blocked from accessing the wireless
network: * Select Just Deny MAC Addresses in MAC List. * For
each device to be blocked, enter the wireless MAC address of
the device in the New MAC Address field and then click the ADD
button.
6. Click Save.
Your AirTies device supports 802.1x Authentication protocol as well.
For detailed information about how to setup 802.1x security, please
check the AirTies Website at www.airties.com .
MESH
AirTouch technology automatically configures two devices to create
a MESH. Simply push the AirTouch button on the two devices that
you want to configure a MESH between. MESH can also be
configured manually.