User manual

Click Connect to enable bridge mode. Click OK at the warning. The
device is now in Universal Bridge mode.
To use Universal Bride you must change your device cabling:
Universal Bridge Cabling
First complete the cabling process as shown in the diagrams.
1. Connect the power adapter inside your box to the power inlet
socket of your device and plug into the electric socket.
2. Turn on the Air 4410 by switching the On/Off button to position
"1".
3. Connect the Ethernet cable inside your box to the Air 4410's
Ethernet port and connect the other end to the Ethernet
enables device that you want to connect to your wireless
network.
If your device is supported multiSSID, up to four separate SSIDs can
be configured. By default one is configured. To add additional SSIDs
you need to check the Enabled check box.
• Primary SSID is the name that the wireless device broadcasts.
This is the name that can be seen on computers when you
select what wireless device to connect to.
• Checking the Hidden SSID box will hide your SSID during
broadcast. This is not recommended since hiding the SSID will
prevent laptops from seeing your network within their range.