User manual

From the list select your Access Point that you want to bridge with.
When you select the Access Point you will be prompted for your
password if a secure connection has been configured on the Access
Point. Enter the password and click Connect.
A warning will be displayed, informing the user that wireless Access
Point will be disabled and that they will only be able to connect to
the device with an Ethernet cable. Click OK to save the changes and
enable Universal Bridge mode.
The device is now configured as a bridge device. Connecting a
device using a network cable will bridge the device to the wireless
Access Point that you configured. The device should not be
connected by cable to the Access Point that it has been bridged
with otherwise your network will not function correctly.
Note that the IP address of the device may change. AirTies Network
Assistant can be used to find your device and reconfigure if
necessary. Alternatively you can connect a computer directly to the
device to connect and configure the device.
If you want to turn your device back into Access Point mode then
you need to do this from the Wireless Settings menu.
Manual Mode
If your SSID is hidden then you need to configure the Access Point
using manual mode. Underneath the list of SSIDs you can manually
enter the SSID, security mode and password of your existing Access
Point.