User manual

By default the checkbox "Use ISP assigned DNS Servers" should
always be selected. If you want to specify your own DNS servers
then you can uncheck this checkbox and specify your own primary
and secondary DNS servers by entering the IP address of each
server.
Click "Save" to complete the DNS setup.
MAC Cloning
You will see that "Mac Cloning" submenu, under the "INTERNET"
menu on your device's web interface.
In this page, MAC address and Hostname can be set manually and
MAC address can be also cloned automatically.
LAN SETTINGS
Any device that you connect to your router, such as PCs, network
printers, IP cameras, etc., are clients. Any operation related to
clients that will have a local network connection to your router can
be done through the "LAN" menu of the Web interface and its
submenus.
When you click on the "LAN" menu, the "LAN Client List" screen will
come up. All clients that are connected to your router and their
connection details are shown on this screen.
IP and DHCP Settings
Each client that is connected to your device takes a local IP address
(Internet Protocol Address). The device's module which distributes
IP address informations is called DHCP (Dynamic Host Configuration
Protocol). You can configure the IP and DHCP Settings of your
device, from the IP and DHCP Settings submenu under the LAN
menu.