User manual

device. There is also a web interface to the device that allows for
basic and advanced settings to be configured. You do not need to
be connected to the Internet to access the device's Web UI. To
connect to the device follow these steps:
For Gateway Devices the IP address will be 192.168.2.1
1- Run a Web browser program on your computer (Internet
Explorer, Mozilla Firefox etc. ).
2- In the Web Browser's "Address" field, write the address
192.168.2.1 which is the default web interface address of device
and press "Enter"
3- The "Welcome" screen of the Web Interface will appear. On the
screen you will see a dialog box asking for the password to be
entered. By default there is no login password for your device.
Leave the password fiend empty and click OK.
For Access Points the default IP address is 192.168.2.254 if no
DHCP server is discovered on the network.
If a DHCP Server is discovered on the network then you need to
discover the address of the device. This can be done as follows -
• Windows users should use AirTies Network Assistant
• Windows users can locate the device under Network and select
properties
• Non windows users should log into their existing gateway and
view the LAN / DHCP settings to see what IP address has been
giving to the AirTies device. The device name will appear in the
list of clients.
Note: To set a password on the login screen, read "MANAGEMENT"
under the "Password Settings" section
Homepage