User manual

• For ADSL you need to enter your username and password
supplied from your ISP.
• For Ethernet you need to choose a protocol and enter
username and password supplied by your ISP if needed.
• For 3G you need to enter the PIN from your 3G SIM card.
Click "Next" to save the Internet connection settings. The screen
appears that indicates AirTies Network Assistant application has
been installed successfully. If you want to save your device to
AirTies database and take advantages of AirTies services, fill in the
relevant sections.
Running AirTies Network Assistant
The AirTies Network Assistant application will always run in the
background and can be accessed by clicking the AirTies logo in the
notification area (bottom right corner, next to the clock). AirTies
Network Assistant starts every time the PC starts, allowing for the
network to be continually monitored.
If you want to exit AirTies Network Assistant then you must right
click the AirTies logo in the notification area and select "exit". If
AirTies Network Assistant is not running and you want to run it then
you must select the AirTies Network Assistant application from the
start menu under All Programs > AirTies Wireless Networks >
AirTies Network Assistant.
Network Display
The network display is the central component of AirTies Network
Assistant. Here all devices on the network are displayed with
information about each device, status of network connection and
problems with the network. Once AirTies Network Assistant has
been installed and the connection between your PC and your AirTies
device has been configured then the network display will be shown
to the user. For normal usage when AirTies Network Assistant starts
the network display will be shown.