User's Manual

Unpacking
Unpack and check that all items have been enclosed.
Packing contents: ①radio ②antenna ③battery pack
(1,700 mAH) ④belt clip ⑤hand strap ⑥charger ⑦user’s
manual
Optional Accessories
1. External speaker/microphone
2. Additional battery pack
Getting Ready
1. Installation and Removal, Belt Clip
Installation: Align the belt clip with the
plastic slots of the battery pack. Slide
the belt clip onto the battery pack,
pushing firmly until a click heard.
Removal: Hold up the belt clip release tab with a
fingernail or a coin (or like instrument). While
holding up the release tab, slide the belt clip out
and away from the battery pack.
2. Installation and Removal, Battery Pack
Installation: Turn off the transceiver. Hold the
transceiver with the back of the unit facing up.
Place the battery pack against the back of the
transceiver so that the tabs on the transceiver engage
the four openings in the battery pack. Slide the battery
pack toward the top of the transceiver until a click heard.
Removal: Turn off the transceiver. Hold the radio with
the back of the unit facing up. With the thumbnail of your
other hand slide the latch lever down. While holding the
latch lever down, slide the battery pack down toward the
bottom of the transceiver. Separate the battery pack from
the transceiver.
3. Installation Antenna
Rotate the antenna clockwise until it is seated firmly.
*. Before starting operation, make sure the battery is fully
charged.