FCC Part 90 Certification Airtech Information & Communicatons UHF-FM Handheld Transceiver AT-400B Appendix I. Operational Description FCC ID : Report No : Date of Test : ONKAT-400B E01.0625.FCC.
FCC Part 90 Certification Airtech Information & Communicatons UHF-FM Handheld Transceiver AT-400B FCC ID : Report No : Date of Test : ONKAT-400B E01.0625.FCC.
SAFETY TRAINING INFORMATION Your FM radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the W ARN ING course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for “Occupational Use Only.
this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio. • DO NOT transmit for more than 50% of total radio use time (“50% duty cycle”). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the “TX indicator” lights red. You can cause the radio to transmit by pressing the “PTT” switch.
