User's Manual

Description
Power on / off and Volume Control Switch
Turn the transceiver on by rotating power on / off and
volume control switch clockwise and control the volume.
 Channel Select Button
Select the desired channel with pressing Up and Down
button, pressing and holding down more than 1 second
makes the channel moving fast. And you can choose On
or Off in function mode.
 PTT(Push To Talk) Button
Hold down to transmit, release to receive.
 Function Button
Refer to “OPERATION” page 7.
 Monitor Button
Press to monitor. Holding down over 2 seconds keeps
monitoring function on, and press shortly again or PTT
Button to stop.
 LCD Display Panel
Refer to next page.
 Tx / Rx Indicate LED (3 colors)
On Transmitting
Red
Blinking Low battery
On Receiving, monitoring
Green
Blinking Different sub-tone when receiving
Orange On
Initializing, programming and
cloning
 Microphone
Talk 5~7Cm in distance during transmitting.
 Speaker
 External Earphone/MIC and Programming Jack Socket
 Battery Pack
 Helical Antenna












AIRTECH INFORMATION & COMMUNICATION CO., LTD.
FCC ID: ONKAT-100B
JOB #: 606BK0
EXHIBIT #: 6D