User's Manual

uMAXe Installation Guide
Page 37 Commercial in Confidence UGD-D00218 Rev A
Figure 20 - Adjustable Mounting Kit 2, with ‘V’ Blocks
5.4.2 Install Omni Antenna
This describes the mounting of the Omni mast mount antenna (ordered separately).
Figure 21 - possible Omni antenna array
To mount the Omni antenna for the uMAXe in a mast mount configuration, perform the
following steps:
1. Assemble Omni antenna array on the ground at the installation site.
2. Attach the antennas to the mast and connect the cables while on the ground.
3. Use the mounting brackets provided with the antenna(s).
4. Carefully connect the antenna and mast assembly to its mounting bracket and tighten the
clamp bolts.
Note: This assembly requires more than one (1) person to assemble in place.