User's Manual

uMAXe Installation Guide
Page 25 Commercial in Confidence UGD-D00218 Rev A
UMAXE Base Station
parts
Consisting of
Outdoor power converter for 3.x GHz
Type-IC DC Power
Cable
Available either in - 10, 15 or 30 meter lengths. Additional lengths
available.
Multimode fiber pigtail
cable (not included)
(optional) (ordered
separately)
Multimode fiber pigtail cable – ODC - LC connector. Terminates the
outdoor fiber cable and provides an indoor LC connector. 2 meter
length.
Grounding Cable
(required) (not
included)
Circular earth braid, 120A current (16 mm²), jacketed or not with cable
size = AWG 4 – 6 with lug (terminal) on enclosure side with hole M6
The uMAXe power supply (PS) can be installed with various cable lengths according to the site
requirements. The cable lengths are determined by the length of the run between the PS and the
uMAXe. Use the following table to determine the required power supply output to ensure proper
operation of the uMAXe.
Table 11 - Input Power for uMAXe
uMAXe 2x10
(2.3-2.7 GHZ)
&
uMAXe 1.4
(1390-1435 MHz)
uMAXe 3x05
(3.3-3.38 GHZ)
Input Voltage to uMAXe (1)
-38 VDC to -60 VDC
-38 VDC to -60 VDC
PS output Voltage – 30 meter cable
(2)
-42 VDC min
-41 VDC min
PS output Voltage – 75 meter cable
(2)
-50 VDC min
-46 VDC min
PS output Voltage – 100 meter
cable (2)
-53 VDC min
-49 VDC min
Figure 5 - PS – uMAXe