User's Manual

ManualsBrandsAirspan Networks ManualsElectronicsWiMAX base station

uMAXe Installation Guide

Page 24 Commercial in Confidence UGD-D00218 Rev A

UMAXE Base Station

parts

Consisting of

Wall mounting kit

(ordered separately)

1 x Rear panel – PN 402-00-118

1 x Top adaptor – PN 402-00-119

1 x Bottom adaptor – PN 402-00-120

2 x Screw M12x180 DIN 933 – PN 501-02-034

4 x Spring washer M12 DIN 127B – PN 501-04-007

4 x Flat washer M12 DIN 125 – PN 501-04-006

2 x Nut M12 DIN 934 – PN 501-03-003

4 x SEMS screw M8x20 with 2 washers – PN 501-05-011

Pole mounting kit

Dia.60 – 120mm –

plus fixing

accessories.

(ordered separately)

1 x Rear panel – PN 402-00-118

1 x Top adaptor – PN 402-00-119

1 x Bottom adaptor – PN 402-00-120

2 x Screw M12x180 DIN 933 – PN 501-02-034

4 x Spring washer M12 DIN 127B – PN 501-04-007

4 x Flat washer M12 DIN 125 – PN 501-04-006

2 x Nut M12 DIN 934 – PN 501-03-003

8 x SEMS screw M8x20 with 2 washers – PN 501-05-011

2 x Pole bracket for 60-120mm pole – PN 402-00-121

1 x earth kit

1 x M5 screws

1 x M5 washers

1 x M5 spring washers

Alternative: SEMS screw (includes 2 washers)

GPS antenna &

accessories

(each ordered

separately)

1x GPS Antenna. An active GPS antenna which, by using the

appropriate mounting bracket, can be used with uMAXe for network

synchronization.

For mounting directly to the top of uMAXe, this GPS Antenna should be

used in conjunction with uMAXe GPS Antenna mounting bracket

w/Handle pre-assembled on the UMAXE and the 80cm GPS Cable

RG58 TNC-TNC.

When mounting remotely from the base station unit, this antenna should

be used in conjunction with the Remote GPS Antenna Mounting Bracket

(GPS-MNT-1) and the 16m GPS Cable RG58 TNC-TNC.

80cm or 16m Cable Assembly - 80cm (CBL-GPS-TNC-0.8-1) or 16m

(CBL-GPS-TNC-16-1) RG58 cable. 16m connects remote mounted

GPS Antenna (GPS-ANT-1) to the UMAXE via TNC connectors. The

80cm, cable for mounting GPS directly to the top of UMAXE.

GPS Lightning/Surge

protector (ordered

separately)

1x Lightning/Surge protector (required)

AC/DC Power Supply

(PS)

Indoor power converter for 1.4 GHz

Indoor power converter for 2.x GHz