User's Manual

uMAXe Installation Guide
Page 23 Commercial in Confidence UGD-D00218 Rev A
4.2 Verify Installation Requirements
4.2.1 Verify the Tools
Table 9 - uMAXe installation tools
Tool
Large Crosshead Screw driver Phillips # 3 or Pozidrive # 3
Small flat blade screwdriver
Medium flat blade screwdriver
13mm or 1/2 inch open ended spanner
10mm or 13/32 inch open ended spanner
Wire strippers
Wire cutters
Ring terminals crimp tool
RJ45 crimp tool
4.2.2 Verify the Parts and Kits
Table 10 - uMAXe installation parts and kits
UMAXE Base Station
parts
Consisting of
1 x uMAXe unit
Base station unit
1 x RJ45
Weatherproof
Connector Covers
Weatherproof connector covers for use with standard cat 5 RJ45
network connections.
1 x mains cable
14AWG x2 (ordered
separately)
30 meter lead with M17 3 pole plug
When distance from outdoor Power supply to Base Station is over 30 meters additional power
cable must be connected via a junction box (ordered separately) for total distance of up to 130
meters.
14AWG x2 (ordered separately) – up to 40 meters
12AWG x6 (ordered separately) – up to 100 meters
1 x Ethernet RJ45
environmental shroud
LTW IP68 or Amphenol environmental connector
Filter (Cavity filter) Kit
(for 2.3 GHz variant
only)
2 x Cavity Filters – 141-00-148
4 x antenna cables – 689-000-47