User's Manual

uMAXe Installation Guide
Page 21 Commercial in Confidence UGD-D00218 Rev A
3 Getting Started
3.1 Workflow of Installation
The Workflow to install the uMAXe is shown in the following diagram:
Figure 4 – Workflow of Installation
Caution: Antennas 1 & 2 Tx/Rx must be connected and attached before uMAXe
is powered on.
3.2 uMAXe Installation Checklist
Plan the installation of the uMAXe by using the Installation Checklist, which you can find as a
removable job aid in Appendix A for this guide.