User's Manual

uMAXe Installation Guide
Page 13 Commercial in Confidence UGD-D00218 Rev A
OMNI Directional
pending
pending
pending
Table 5 - 2.x GHz Antenna Types - Technical
Type
Frequency range
Gain
Part number
60° Dual Slant X-Polar
2.3-2.7 GHz
18.0 dBi
SEC60X-2.X-RC-1
90° Dual Slant X-Polar
2.3-2.7 GHz
17.0 dBi
SEC90X-2.X-RC-1
Omni 10dBi Vertical External
2.3-2.49 GHz
10 dBi
ANT2300OV10-360
Table 6 - 3.x GHz Antenna Types - Technical
Type
Frequency range
Gain
Part number
60° Dual Slant X-Polar
3.3 - 3.8 GHz
18.0 dBi
SEC60X-3.5-RC-1
90° Dual Slant X-Polar
3.3-3.8 GHz
17.0 dBi
SEC90X-3.5-RC-1
Omni- directional Vertical Sector
3.3 – 3.5 GHz
10.0 dBi
OMNIV-3.4-RC-2
Omni- directional Vertical Sector
3.3 – 3.72 GHz
10.0 dBi
OMNIV-3.5-RC-1
Omni- directional Vertical Sector
3.4 – 3.6 GHz
10.0 dBi
OMNIV-3.5-RC-2
Omni- directional Vertical Sector
3.6 – 3.8 GHz
10.0 dBi
OMNIV-3.7-RC-2
Blade Antenna
3.6-4.0 GHz
2.0 dBi
SBA-3800-D1/1040
uMAXe Antenna Usage
uMAXe has two (2) RF ports that can be connected to either:
 A single 2-port antenna
 Two single-port antennas
Note: Appropriate mounting kit (included) for the dual port and omni
antennas are required.
Dual slant cross polarized (X-Pol) antenna with two (2) ports - connected via 2 RF
jumper cables to uMAXe.
Omni antennas – for 360 degree coverage using a single uMAXe - requires an
Omni antenna for each receiver – 2 Omni antennas.
Note: The Omni antennas must be separated – with at least one meter
separation from each other.
The following table describes different antenna arrays when using either two (2) receivers:
Table 7 - Antenna arrays
Frequency Band
# of Receivers
Sector
Antenna Type
# of Antennas
1.4 GHz
2
60º
1390-1435 MHz 60º 13.5 dBi
Dual X-Polar - mounting
included - pending
1
2.3 GHz
2
60º
2.3-2.7 GHz 60º Dual Slant X-
Polar Antenna - mounting
included
1