User's Manual

AirSynergy 2000 Installation Guide
Page 13 Commercial in Confidence UGD-D01001 Rev A1
Maximum Output TX Power
Table 1 - AirSynergy FCC Maximum Output TX Power
Frequency Band
FCC
TX EIRP
Antenna Gain
728-746 MHz
33.68dBm
47.18dBm
13.5dBi
2110-2170 MHz
33.48dBm
50.48dBm
17 dBi
2496-2690MHz
33.65dBm
51.65dBm
18 dBi
2620-2690 MHz
33.36 dBm
51.36 dBm
18 dBi
Table 2 - AirSynergy ETSI Maximum Output TX Power
Frequency Band
ETSI
TX EIRP
Antenna Gain
728-746 MHz
33dBm
46.5dBm
13.5dBi
2110-2170 MHz
33 dBm
50 dBm
17.0 dBi
2496-2690MHz
33dBm
51dBm
18.0 dBi
2560-2630 MHz
33 dBm
51 dBm
18.0 dBi
2620-2690 MHz
33 dBm
51 dBm
18.0 dBi
3400-3500 MHz
33 dBm
51 dBm
18.0 dBi
Caution: Do not set maximum output TX power to higher than local regulations.
Power Consumption
AirSynergy has a Max nominal power consumption of 78W. AirSynergy power consumption is
described in the following table:
Duplex
Tx Power at RF
Port (dBm)
Nominal Power
Consumption (W)
Power Supply
Requirement (W)
FDD
30
80
120
TDD
30
78
120
Antenna Types
The following antennas are designed specifically for AirSynergy deployments. Externally mounted
antennas are available for use as well, but are specified separately.
Note: For a list of compatible external antennas, please contact your nearest
Airspan sales representative.
Switched Beam Antenna
Switched Beam antenna (with built-in GPS antenna) variant include a top mounted steerable
antenna with the following specification. The antenna is a multi-element cross polarized (dual
slant) design which can be used in directional or omni modes of operation.