User's Manual

AirSynergy 2000 Installation Guide
Page 26 Commercial in Confidence UGD-D01001 Rev B
Table 9 - External Antenna and feeder kits (Optional)
Installation Kit / Part
Note
External Antenna
Several variants - Verify the
correct unit type is being
installed.
Typically a 2 port dual-slant cross-polar antenna
Pole mounting kits (supplied with antenna)
Antenna RF Cable
Variable length Heliax RF cables (for mounting antenna
on the same pole immediately behind the AirSynergy unit
or where the Antenna needs to be mounted away from the
AirSynergy unit)
Table 10 - AirSynergy additional items
Additional Common Accessories
(not provided by Airspan)
CAT-5e RJ45 network cable
Cable ties
Self-amalgamating tape
Black PVC tape
Ring terminal for ground cable. M6
Ground cable (4-6 mm) (yellow and green cable)
4.2.2.1 Power Supply
AirSynergy supports direct connection to DC power source (-48V DC):
Operational Voltage Range: -40.5 to -57 VDC
Transient Voltage: +150V (ETR283).
4.2.3 Verify Components
The following figures display various AirSynergy components and accessory kits.
Note: AirSynergy variants with Sunshield, front mounted antenna and Switched
Beam antenna come factory pre-assembled.
Table 11 - AirSynergy components
Parts
Images
AirSynergy Unit (with Sunshield)
in typical packing box