User's Manual

AirSynergy 2000 Installation Guide
Page 51 Commercial in Confidence UGD-D01001 Rev A
To connect AirSynergy BS via Netspan:
1. Log into Netspan
2. Navigate to Server > Discovery Parameters
Figure 53 – Discovery Tasks
3. Click Add
4. Define:
a. Name
b. Write Community
c. Read Write
Notes: This should be same as was configured before on the BS. TBD
5. Define the discovery Target IP Address Range. For example – Start address =
172.30.0.100 and End Address=172.30.0.101
6. Port – enter 161
7. Click OK, as displayed below: