User's Manual

AirSynergy 2000 Installation Guide
Page 28 Commercial in Confidence UGD-D01001 Rev A
Installation Kit /
Part
Consisting of
Note:
OPTIONAL
Heavy-duty
mounting (for
specific
mounting
locations)
1 heavy-duty pole clamp mounting
kit
4 clamps
4 M8x150 bolts
4 M8 plain washer
4 M8 spring washer
Connecting
cables
CAT5e
External grade 25m with weather
hood pre-fitted. One for each
AirSynergy unit
Grounding cable
M6 Lug at each end
Power Supply
and power cable
48V PSU module
1 per AirSynergy unit
Power drop cable
1 per AirSynergy unit (or dual
radio unit) with external grade
30m power cable with
compatible power weather-proof
connector .
Cable Join kit
1 per AirSynergy unit (or dual radio
unit)
48V PSU in weatherproof enclosure
(NEMA approved)
Alternative to the standard 48V
PSU (required for all North
American installations)
Table 9 - External Antenna and feeder kits (Optional)
Installation Kit / Part
Note
External Antenna
Several variants - Verify the
correct unit type is being
installed.
Typically a 2 port cross-polar antenna
Pole mounting kits (supplied with antenna)
Short Feeder cable
0.5M feeder tails x 2 (for mounting antenna directly above
the AirSynergy unit)
Long Feeder tail
1.5M feeder tails x 2 (for mounting antenna on the same
pole immediately behind the AirSynergy unit or where the
Antenna needs to be mounted away from the AirSynergy
unit)
Table 10 - Input Power for AirSynergy
AirSynergy
(2.3-2.7 GHZ)
&
(698-746 MHz)
3x (3.3-3.38 GHZ)