User's Manual

AirSynergy 2000 Installation Guide
Page 22 Commercial in Confidence UGD-D01001 Rev A
2 Introduction
This section provides a descriptive overview of the Airspan’s AirSynergy Pico eNodeB variant and
its place in the product suite.
2.1 AirSynergy
AirSynergy is part of Airspan’s carrier-class 4G Pico eNodeB family. AirSynergy supports 3GPP’s
Long Term Evolution (LTE) eNodeB, providing high-speed data and mobility, in order to meet the
demands of the Broadband Wireless Access market.
AirSynergy is a compact, easy to install pico-cell, allowing an operator to deploy LTE broadband
services using existing Street Furniture (e.g. street lamps, power poles, etc…)
AirSynergy supports a wide array of frequencies and channel sizes, able to operate in both
licensed and unlicensed bands with more frequencies and channel sizes added regularly.
AirSynergy implements dual 30dBm (2 x 1W) transmitters, with several optional integral antennas
and external antennas connectivity.
AirSynergy fully supports the standard LTE (Uu/S1/X2) interfaces, and can also operate in
“Standalone” mode, without the need for an LTE Core network - providing an ideal cost effective
solution for fixed applications.
AirSynergy is managed by an SNMP-based network management system (Netspan) using
standard and proprietary MIBs. Basic management can be performed using any standard Web
browser.
Note: For management refer to AirSynergy Commissioning documentation.
2.1.1 Deployment Description
A highly flexible and scalable 4G Base Station, the AirSynergy is capable of supporting LTE
profiles across multiple frequency bands.
Note: The following is for illustration only; actual layout may differ as
infrastructure is installation-specific.
Note: AirSynergy must be properly grounded according with NEC and other
local safety code requirements.
Note: Installation of the GPS Lightning/Surge protector (ordered separately)
is necessary to protect the GPS antenna. The Lightning/Surge protector must
be properly grounded with NEC and other local safety code requirements.
Note: (U.S.A. - WCS market only) A Cavity filter is required for the 2.3 GHz
variant (ordered separately).
Note: An External Duplexer is required for some FDD variants (supplied with
AirSynergy, where required).