User's Manual

AirSynergy 2000 Installation Guide
Page 15 Commercial in Confidence UGD-D01001 Rev A
Maximum Output TX Power
Table 1 - AirSynergy FCC Maximum Output TX Power
Frequency Band
FCC
TX EIRP
Antenna Gain
2.62 – 2.69 GHz
33.36dBm
51.36dBm
18dBi
Table 2 - AirSynergy ETSI Maximum Output TX Power
Frequency Band
ETSI
TX EIRP
Antenna Gain
698-746 MHz
33 dBm
46.5dBm
13.5dBi
2290-2350 MHz
33dBm
51dBm
18.0dBi
2340-2400 MHz
33dBm
51dBm
18.0dBi
2496-2570 MHz
33dBm
51dBm
18.0dBi
2560-2630 MHz
33dBM
51dBm
18.0dBi
2620-2690 MHz
33dBm
51dBm
18.0dBi
3300-3400 MHz
33dBm
51dBm
18.0dBi
3400-3500 MHz
33dBm
51dBm
18.0dBi
3500-3600 MHz
33dBm
51dBm
18.0dBi
3600-3700 MHz
33dBm
51dBm
18.0dBi
3650-3675 MHz
33dBm
35dBm
2dBi
3700-3800 MHz
33dBm
51dBm
18.0dBi
Caution: Do not set maximum output TX power to higher than local regulations.
Power Consumption
AirSynergy has a Max nominal power consumption of 78W.
Antenna Types
The following antennas are designed specifically for AirSynergy deployments. Externally mounted
antennas are available for use as well, but are specified separately.
Note: For a list of compatible external antennas, please contact your nearest
Airspan sales representative.
Note: For currently supported antenna types see Appendix F .
Switched Beam Antenna
Switched Beam antenna (with built-in GPS antenna) variant include a top mounted steerable
antenna with the following specification. The antenna is a multi-element cross polarized (dual
slant) design which can be used in directional or omni modes of operation.
Table 3 - Switched Beam Antenna Parameters - Directional Mode