User Manual

AirSynergy 2000 Installation Guide
Page 47 Commercial in Confidence UGD-D01001 Rev B
Figure 50 - attaching PSU
Note: For USA deployments an alternative PSU and enclosure arrangement is
required – Refer to Appendix D.
Figure 51 - PSU for USA deployment
Caution: Safety - Disconnection of AC supply.
 When AirSynergy is connected directly to building or lamp post wiring a
suitably rated and easily accessible disconnect device shall be
incorporated external to the equipment.
 When AirSynergy is connected to the AC power supply using a plug and
socket, the socket-outlet shall be installed near the equipment and shall
be easily accessible.