User's Manual
Airstream 4001 F49-MRT User Guide
Page 38 Commercial in Confidence UWB-D00211 Rev B
Figure22‐DMZ
2. Enter the IP address of the computer connected to the CPE’s LAN. The IP address should
be on the same subnet as CPE’s LAN subnet
3. Check DMZ on - to enable DMZ
4. Check Allow redirect Ping to Host - to enable pinging to the PC behind the CPE
5. Check Allow CPE WEB access to Host - to enable web access to the PC behind the CPE
14.3 WiFi
Note: Full WiFi support is currently under development and is planned for the
near future.
Note: In the current version, the default WiFi parameters are not configurable
and are displayed on the Network Status page as read-only
The default WiFi parameters displayed on the Network Status page (read-only) are:
¾ WiFi enabled
¾ SSID: AS_MRT
¾ Security disabled
¾ Interface IP:10.2.2.1, subnet mask 255.255.255.0
¾ DHCP server
To access the WiFi page:
1. Click on Network to open the drop down list and choose the Interfaces - WiFi sub-option.
Figure23‐WiFi